Micro Welder Stations The micro welder works by directly melting metallic joints with high voltage electrical sparks, without the need of solder, paste or any other chemicals. Joints created by the micro welder is finer and stronger than regular soldering, and lower impedance, can sustain higher temperature. It can also be used to directly connect enameled wires with diameters from 0.02mm to 0.4mm onto metal connectors or circuit boards. The welding power and pressure can be precisely adjusted and controlled. Example applications of the micro welding machine include manufacturing and repairing of the following devices: l          RF components l          Inductors l         Transformers l         crystals l         chips and modules l         SMT speakers l         micro motors l         PCB boards Characteristics: l          Direct welding of enameled wires, regular wires or metal tapes from 0.02mm to 0.4mm. l          Welding voltage 0.01V adjustable, pulse width 1/10,000 ms adjustable, pressure 0.3 ounce adjustable. l          Strong welding points, low impedance l          No paste or flux needed, environment friendly l          Fast, 200 welding points per minute l          Various welder tips for different requirements The micro welder can be used to repair printed circuit boards coated with different metal materials. It can generate traces or pads as fine and thick as 0.5mm. Applications of the Micro Welder Now accept customer assembling and production of RF components with the microwelder.